← Back to dashboard

Elevate Home App

Installer Setup

Fill this out once for this home. These details tell the app what equipment it is measuring, so the efficiency math matches your real system instead of generic guesses. You can change it anytime.

The System

The basics of the air conditioner and indoor coil you are measuring.

The Blower

The fan that moves air through the system. This affects how airflow is calculated.

Location

Just the ZIP code for this home. The app finds the nearest official weather station and pulls live outdoor conditions and air pressure on its own.

Rated Efficiency

The manufacturer's lab ratings. The app uses these as a reference and a sanity check, then shows your real measured performance against them.

Automation

Let Elevate act on the thermostat to keep the home comfortable and dodge peak-hour costs. These run automatically in the background around the clock — even when the app is closed. Everything is OFF by default — turn on only what this home is enrolled in. When connected, Elevate adjusts automatically; without a thermostat connection these become recommendations only.

Filter Health Baseline

Capture this system's static-pressure baseline so the homeowner's Filter Health gauge can track filter load. Remove the filter for the first reading, install a fresh one for the second. Every future filter change re-runs this, which also builds a long-term evaporator-coil fouling baseline.

Filter calibration

We'll capture two quick readings to learn this system's baseline. This isolates the filter's own restriction, so it works on any ductwork.

Utility Rate

Confirms which Evergy rate plan this home is on for cost calculations.